|
Electric Motors
Brushed and Brushless outrunners & inrunners
Brushed Motors/Gear Drives
600-Speed Brushed Motor - This is a powerful
600-series Speed motor used in many direct drive aplications. This motor is used in our
ERC GS Thermal, and can be used as direct drive in many 2m Sailplanes. SPECS:
Voltage: 3 cell lipo or 8-10 cell 1700mAh battery
ESC Required: 30A Brush
Recommended Prop: Folding Prop 8"×4.5"
|
|
Brushless Motors
ST 400 Super Tigre Brushless Outrunner - * A solid blend of performance and price, backed by an amazing 1-year limited warranty
* Designed for 7.4V and 11.1V (2-3S) applications
* Mounts feature the same bolt pattern as other popular motor brands, including ElectriFly™ RimFire™ motors
* Ready for instant installation and hookup
* 3.5 mm gold-plated bullet connectors are already attached and compatible with both SuperTigre ESCs.
* All Include mounts, templates and leads with attached connectors.
* 180-day limited warranty
SPECS:
Voltage: 7.4-11.1V
RPM/V (Kv): 950
Current: 13-18A
No Load Current: .6A
Power: 145W
Shaft Diameter: 3mm hardened steel
Recommended Props: 8x6 to 11x7 Slow Flyer (dependent on voltage)
Weight: 1.8 oz. (50 grams)
|
|
X2204/14 Brushless Outrunner - Comes with radial
mount and prop saver adapter built into motor housing. Similar to speed 300, but more power and super light weight. This motor is perfect for lightweight indoor models like shockeys and slow flyers and is great for lightweight micro outdoor models as well!
SPECS:
Voltage: 7.4-11.1V
RPM/V: 1,400
Current: 2-7A (9A @ 60 sec)
Power: 45W+
Shaft Diameter: 3mm hardened steel
Recommended Prop: 7x4 APC sf @ 3s = 15.85 oz. thrust
8x4 APC sf @ 2s = 12 oz. thrust
Weight: 0.7 oz. (19 grams)
|
|
X2208/08 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to speed 300, but MUCH more power. This high KV motor is perfect for lightweight Park Jets!
SPECS:
Voltage: 7.4-11.1V
RPM/V: 2,600
Current: 8-15A (20A @ 60 sec)
Power: 130W+
Shaft Diameter: 3.17mm
Recommended Prop: 5.1x4.5 APC e @ 3s = 19.3 oz. thrust/ 88 mph Pitch Speed!
Weight: 1.27 oz.
|
|
X2208/17 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to speed 480, great for Park Flyers and 3-D Foamies weighing
7-22 oz. The optimum setup for this motor is with a 10x3.8 SF Prop, 3s 800mah LiPo and a lightweight Hang-It R/C 10amp ESC.
SPECS:
Voltage: 7.4-11.1V
RPM/V: 1,100
Current: 4-12A (14A @ 30 sec)
Power: 150W+
Shaft Diameter: 3.17mm
Recommended Prop: 11x4.7 APC sf @ 2s = 13.8 oz. thrust 10x3.8 APC sf @ 3s = 18.7 oz. thrust
Weight: 1.2 oz.
|
|
X2212/15 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to speed 400, great for Park Flyers & 3D Foamies weishing
10-28 oz. The optimum setup for this motor is with a 12x3.8 Prop, 1200mah 3s LiPo and an 18 amp MAG8 ESC. SPECS:
Voltage: 7.4-11.1V
RPM/V: 930
Current: 4-16A (18A @ 60 sec)
Power: 150W+
Shaft Diameter: 3mm
Recommended Prop: 12x3.8 APC sf @ 3s = 34.8 oz. thrust 13x4.7 @ 2s = 22 oz. thrust
Weight: 1.6 oz.
|
|
2408-21-H Brushless Outrunner for Post Mount - Comes with post
mount and prop nut. Perfect for our CB-35 and others. SPECS:
Voltage: 7.4-11.1V
RPM/V: 1,400
Current: 15-18A
Max RPM: 8,200
Max Power: 113W
Shaft Diameter: 3mm
Recommended Prop: 8x6 3s /9x6 2s
Weight: 1.6 oz.
|
|
HM2812-1200 Brushless Outrunner - Comes with radial
motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for
our Neiuport 28 and others. SPECS:
Voltage: 7.4-11.1V 2~3S Li-Po
Current: 6.8~15.8A
Watts: 65~166W
RPM/V: 1,200
Thrust: 27oz. (770g)
Prop: 8x3.8~10x4.7
Weight: 2.0 oz
|
|
A20-28M Brushless Outrunner - Comes with radial
motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for our
Yak 54-280, Extra260 EP, EP Extra330L, and others. SPECS:
Voltage: 7.4-11.1V
Current: 15-20A
Power: 190 Watts +
RPM/V: 1,050
Prop: 9x4.7/9x6
Weight: 1.6 oz
|
|
SK400XT Brushless Outrunner - Comes with radial
mount. Similar to speed 400-450. A real winning combination for park flyers and foamies. Nothing beats a SK400XT, 10x3.8 sf prop, 3s LiPo and Hang-It R/C 10 amp esc!Draws only 3 amps hovering a foamy weighing 8.5 oz. SPECS:
Voltage: 7.4-11.1V
RPM/V: 2,200
Current: 2-10A (12A @ 45 sec)
Power: 100+W
Shaft Diameter: 3mm
Recommended Prop: 11x4.7 on 2s / 10x3.8 on 3s
Weight: 1.5 oz.
|
|
X2212/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to speed 400-450, hi-RPM motor great for heli, high-speed
airplanes, jets weighing 10-35oz. SPECS:
Voltage: 7.4-11.1V
RPM/V: 2,200
Current: 14-22A (28A @ 60 sec)
Power: 200W+
Shaft Diameter: 3mm
Recommended Prop: 6x5.5 APC e @ 3s = 27 oz. thrust / 93mph Pitch Speed!
Weight: 1.6 oz.
|
|
X2217/04 Brushless Heli Outrunner - Includes bullet connectors, male and female. This motor is perfect for ballistic performance on 450 size Helis. SPECS:
Voltage: 7.4-11.1V
RPM/V: 3,500
Current: 10-50A (55A @ 60 sec)
Power: 600W+
Shaft Diameter: 4mm
Dimensions: 27.5mm x 30mm
Weight: 2.5 oz. (70 grams)
|
|
X2217/08 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to speed 480, great for Park Flyers & 3D birds weighing
10-28 oz. SPECS:
Voltage: 7.4-11.1V
RPM/V: 1,100
Current: 9-18A (18A @ 60 sec)
Power: 220W+
Shaft Diameter: 3.17mm
Recommended Prop: 10x5 APC e @ 3s = 40.7 oz. thrust 11x5.5 APC e @ 2s = 27.85 oz thrust
Weight: 2.5 oz.
|
|
Little Screamers "Park Jet" - The perfect choice for Park Jets! . SPECS:
Voltage: 7.4-11.1V
RPM/V: 2,800
Current: 10-20A (23A @ 60 sec)
Shaft Diameter: 3mm
Recommended Prop: 4x4 - 6x5.5 on 3s / 6x5.5 will draw 18.5 amps. Do not static test longer than 30 seconds.
Weight: 25 grams
|
|
Little Screamers "SUPER Park Jet" - Super charge your Park Jets! This motor will produce 24 ounces of thrust at 19 amps with a 7x5 prop on 3s LiPo and 36 ounces of thrust on 4s LiPo at 27 amps. For 4s setups, excellent cooling is required. SPECS:
Voltage: 7.4-14.8V
RPM/V: 2,350
Current: 10-30A (30A @ 30 sec)
Shaft Diameter: 3mm
Recommended Prop: 5x5 - 7x5 on 3s/4s Do not static test longer than 30 seconds.
Weight: 32 grams
|
|
3500Kv Brushless Outrunner - Perfect for ducted fans! This motor fits perfectly inside of our SF 66mm Fan Unit. SPECS:
Voltage: 7.4-11.1V
RPM/V: 3,500
Current: 9-18A (25A @ 60 sec)
Shaft Diameter: 2.3mm
Recommended Prop: 7x4 on 3s / 8x8 on 2s or 66mm Fan on 3s
Weight: 1.8 oz.
|
|
X2814/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to standard .25-.30 size glow engine, great for for sport flying
aircraft weighing 2-4 lbs. SPECS:
Voltage: 7.4-11.1V
RPM/V: 1,400
Current: 18-30A (40A @ 60 sec)
Power: 350W+
Shaft Diameter: 4mm
Recommended Prop: 10x6 APC e @ 3s = 52 oz. thrust
Weight: 3.5 oz.
|
|
35425 Brushless Outrunner - Comes with radial
motor mount, all fasteners, gold connectors & receptacles, and prop adapter. Perfect for
our Super Diamona and others. Power similar to a strong .40 glow engine w/muffler, depending on
prop & battery selection. SPECS:
Voltage: 7.4-14.8V
Current: 35-41A
Power: 506 Watts +
RPM/V: 1,100
Prop: 11x5.5-13x6.5
Thrust: 74 oz (2.1Kg)
Weight: 4.7 oz
Shaft Diameter: 5mm
|
|
X2820/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to a .46 size glow engine, great for for sport & aerobatic
aircraft weighing 2-6 lbs. SPECS:
Voltage: 11.1V - 18.5V
RPM/V: 1,000
Current: 15-25A (37A @ 60 sec)
Power: 560W+
Shaft Diameter: 5mm
Recommended Prop: 13x6 APC e @ 3s = 69 oz. thrust
Weight: 5.11 oz.
|
|
X2826/04 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to a hot .46-.55 size glow engine, great for speed models weighing 2-6 lbs. SPECS:
Voltage: 11.1V - 18.5V
RPM/V: 1,100
Current: 30-50A (55A @ 60 sec)
Power: 600W+
Shaft Diameter: 5mm
Recommended Prop: 14x6 @ 3s, 13x6 @ 4s
Weight: 5.11 oz.
|
|
X3520/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to good sport .50-.61 size glow engine, great for for 3D (to 4lbs),
sport & aerobatic aircraft weighing 3-6 lbs. SPECS:
Voltage: 11.1V - 18.5V
RPM/V: 800
Current: 18-40A (50A @ 60 sec)
Power: 700W +
Shaft Diameter: 5mm
Recommended Prop: 12x6/13x4
Weight: 7.05 oz.
|
|
X4120/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to hot .61 size glow engine, great for for 3D (to 6lbs),
sport & aerobatic aircraft weighing 4-8 lbs. SPECS:
Voltage: 14.8V - 22.2V
RPM/V: 640
Current: 30-65A (70A @ 60 sec)
Power: 900W+
Shaft Diameter: 6mm
Recommended Prop: 14x10 5s / 13x10 6s
Weight: 9.9 oz.
|
|
X4130/06 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to hot .91-1.00 size glow engine, great for for 3D (to 9lbs),
sport & aerobatic aircraft weighing 4-14 lbs. SPECS:
Voltage: 14.8V - 25.9V
RPM/V: 510
Current: 30-60A (70A @ 60 sec)
Power: 1500W+
Shaft Diameter: 6mm
Recommended Prop: 14x10 6s / 16x10 5s
Weight: 14.10 oz. (400 grams)
|
|
X5330/09 Brushless Outrunner - Comes with radial
mount and prop adapter. Similar to a 1-20-1.60 size glow engine or 20-26cc gas (depending on prop),
great for for 3D (to 10lbs), sport & aerobatic aircraft weighing 8-20 lbs. SPECS:
Voltage: 18.5V - 37V
RPM/V: 260
Current: 35-55A (80A @ 60 sec)
Power: 2300W+
Shaft Diameter: 8mm
Recommended Prop: 20x12 / 10 cells
Weight: 21 oz.
|
|
Little Screamers "JET SCREAMER" - The best motor for small electric ducted fan models! The motor comes with a 21mm adapter for easy mounting to fan units. With the motor in the exhaust air of the fan, cooling is very good. RPM on a 56mm fan with a 3s LiPo is over 40,000 and will draw about 14 amps at full throttle (static/loaded). RPM on the same fan with a 4s LiPo is over 50,000 with about an 18-20 amp current drain. We reccommend that you never static test this motor for longer than 30 seconds. SPECS:
Voltage: 7.4V - 14.8V
RPM/V: 4500
Current: 5-24A (18A @ 30 sec)
Power: 190-450W+
Shaft Diameter: 3mm
Recommended Fan: 56mm - 66mm Fans
Weight: 1.75oz. (50 grams)
|
|
| |